×

Registration

Name

Login

Or Login
First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Tubeless Parts

Tubeless Tape for Wheel Pair (2 Wheels)

More Views

Tubeless Tape

Tubeless tape is the latest in rim strip technology and we've developed the best tape for you. Bill Shook carefully selected proprietary polymer materials for our tubeless tape. Our new blue tape sets are stronger, stickier and easier to install. It is more tear resistant. Our tape conforms well to the inner shape of any rim, AC or another brand.

Installation Directions: Start with 1 layer of fiber tape, tape from one side of the valve hole and end at the other side of the valve hole, do not cover the valve hole. Then apply 1 layer of blue tape and it should overlap and cover the valve hole on each size by 6” / 150mm. You can use a towel to smooth the blue tape as you apply it. During installation, keep straight both the fiber tape and blue tape. The valve hole opening can be made with a sharp knife, punch or soldering iron. Widths 22mm, 25mm, 28mm, 32mm, 37mm, 43mm. Small kits are for 2 wheels.

TAPE WIDTH - WHEEL MODEL

22mm - ARGENT / HURRICANE TUBELESS / SPRINT 350 TUBELESS /  VICTORY 30 TUBELESS / ACRD 2218 RIM / 420 TUBELESS / ROAD TUBELESS

25mm - TERRAIN TUBELESS / DISC 101 RIM / TCX / MTB TUBELESS

28mm - RACE / AM28 RIM / ALL MOUNTAIN TUBELESS

32mm - WIDE LIGHTNING / CARBONATOR

37mm - 3834 RIM

43mm - SMOKIN' GUN

$14.00

Out of stock

Specs

Tubeless tape is the latest in rim strip technology and we've developed the best tape for you. Bill Shook carefully selected proprietary polymer materials for our tubeless tape. Our new blue tape sets are stronger, stickier and easier to install. It is more tear resistant. Our tape conforms well to the inner shape of any rim, AC or another brand.

Installation Directions: Start with 1 layer of fiber tape, tape from one side of the valve hole and end at the other side of the valve hole, do not cover the valve hole. Then apply 1 layer of blue tape and it should overlap and cover the valve hole on each size by 6” / 150mm. You can use a towel to smooth the blue tape as you apply it. During installation, keep straight both the fiber tape and blue tape. The valve hole opening can be made with a sharp knife, punch or soldering iron.

WIDTHS 22mm, 25mm, 28mm, 32mm, 37mm, 43mm. Small kits are for 2 wheels.

Shopping Cart

You have no items in your shopping cart.